Bitget Wallet ব্যবহার করে কীভাবে BOOE বিক্রি করবেন

  1. Bitget Wallet অ্যাপ ডাউনলোড করে খুলুন এবং নিশ্চিত করুন যে আপনার অ্যাকাউন্টে eth BOOE টোকেন আছে।
  2. eth BOOE টোকেনকে Ethereum, Solana, BNB Chain, Base বা Tron নেটওয়ার্কে USDT বা USDC-তে সোয়াপ করুন।
    1. বিক্রির জন্য টোকেন নির্বাচন করুন: [ট্রেড করুন] পৃষ্ঠাটি খুলুন, [ক্রস-চেইন সোয়াপ] সেকশনে যান, আপনি যে টোকেনটি বিক্রি করতে চান সেটি এবং এর নেটওয়ার্ক নির্বাচন করুন (যেমন, eth চেইনে BOOE), এবং পরিমাণ লিখুন।
    2. কেনার জন্য টোকেন নির্বাচন করুন: একই চেইনের একটি টোকেন বেছে নিলে (যেমন Ethereum, সোলানা, BNB Chain, Base বা Tron-এ USDT বা USDC), সেটি একই-চেইন ট্রেড হিসেবে গণ্য হয়। অন্যদিকে, ভিন্ন চেইনের একটি টোকেন বেছে নিলে সেটি ক্রস-চেইন ট্রেড হিসেবে গণ্য হয়। ক্রস-চেইন ট্রেডের গ্যাস ফি সাধারণত একই-চেইন ট্রেডের তুলনায় বেশি হয়।
    3. ট্রেডের বিবরণ পর্যালোচনা করুন: সিস্টেম রিয়েল-টাইমে মূল্যের উপর ভিত্তি করে আপনি যে পরিমাণ টোকেন গ্রহণ করতে পারবেন তা প্রদর্শন করবে। আপনি বর্তমান স্লিপেজ এবং দামের প্রভাব (টোকেনের চূড়ান্ত পরিমাণকে প্রভাবিত করে এমন কারণগুলো) দেখতে পারবেন এবং গন্তব্যের ঠিকানা পরীক্ষা বা পরিবর্তন করতে পারবেন (যা ডিফল্ট হিসেবে আপনার বর্তমান ওয়ালেট ঠিকানা সেট করা থাকে)।
    4. উপযুক্ত স্লিপেজ সেট করুন: যখন একটি টোকেনের দাম খুব অস্থির থাকে বা পুলের তারল্য কম থাকে, তখন কম স্লিপেজ সহনশীলতা সেট করলে লেনদেন ব্যর্থ হতে পারে। মসৃণ লেনদেন নিশ্চিত করতে আমরা Bitget Wallet এর স্মার্ট স্লিপেজ ব্যবহার করার পরামর্শ দিচ্ছি।
    5. গ্যাস ফি নিশ্চিত করুন: ট্রানজ্যাকশনের জন্য আনুমানিক গ্যাস ফি দেখতে [নিশ্চিত করুন]-এ ক্লিক করুন। যদি আপনার ব্যালেন্স অপর্যাপ্ত হয়, তবে ফি কভার করার জন্য প্রয়োজনীয় নেটিভ নেটওয়ার্ক কয়েন জমা করতে অন-স্ক্রিন নির্দেশাবলী অনুসরণ করুন।
    6. howToSell_contentSubstep6

ট্রানজ্যাকশন ব্যর্থ হওয়ার সাধারণ কারণগুলো কী কী?

১. গ্যাস ফি অপর্যাপ্ত বা খুব কম সেট করা হয়েছে, তাই ভ্যালিডেটররা এটি প্রসেস করছে না। ২. ওয়ালেট ব্যালেন্স অপর্যাপ্ত। ৩. নেটওয়ার্ক কনজেশন, যার ফলে প্রসেসিংয়ে দীর্ঘ বিলম্ব হচ্ছে।

ট্রানজ্যাকশন ব্যর্থ হলে আমার কী করা উচিত?

অপর্যাপ্ত গ্যাস: নেটিভ টোকেন টপ আপ করুন, গ্যাস ফি বৃদ্ধি করুন, অথবা Bitget Wallet-এর GetGas পরিষেবা ব্যবহার করুন। অপর্যাপ্ত ব্যালেন্স: ফান্ড যোগ করুন এবং পুনরায় পাঠান। নেটওয়ার্ক কনজেশন: উচ্চ অগ্রাধিকারের জন্য গ্যাস ফি বৃদ্ধি করুন, অথবা অপেক্ষা করুন এবং পুনরায় চেষ্টা করুন। অন্যান্য সমস্যার ক্ষেত্রে, কাস্টমার সাপোর্টের সাথে যোগাযোগ করুন এবং লেনদেন হ্যাশ (একটি ব্লক এক্সপ্লোরারে দেখা যাবে) প্রদান করুন।

FAQ

Frequently Asked Questions

To sell BOOE, open Bitget Wallet and make sure your wallet contains BOOE on the eth network. Go to Trade → Cross-Chain Swap, select BOOE as the token to sell, choose the amount, select the token you want to receive (such as USDT or USDC), review the transaction details, and confirm the swap.

Yes. You can exchange BOOE for USDC through Bitget Wallet, provided sufficient liquidity is available for the selected trading route.

Yes. Because BOOE is on the eth network, you'll need a small amount of the network's native token to pay Gas fees. Without enough Gas, the transaction cannot be processed.

The easiest method is to use Bitget Wallet's Cross-Chain Swap feature. It lets you exchange BOOE directly into supported cryptocurrencies without transferring assets to a centralized exchange.

No. Once an on-chain transaction has been signed and submitted, it cannot be canceled. Always verify the transaction details before confirming.

Yes. You can enter any amount of BOOE to swap, provided your wallet still has enough native tokens to cover the required Gas fees.

For many blockchain networks, the first swap requires a token approval transaction, which authorizes the smart contract to access your tokens.

Most swaps are completed within seconds or a few minutes. The exact time depends on blockchain confirmation speed, network congestion, and whether the swap is same-chain or cross-chain.

A same-chain swap exchanges tokens within the same blockchain, while a cross-chain swap transfers value between different blockchains. Cross-chain swaps usually involve additional routing and therefore may require higher Gas fees.

The token may not have been added to your wallet yet. You can search by token contract address or manually import the token if it is supported.